--- cman.5-orig	2006-12-21 20:01:33.000000000 -0500
+++ cman.5	2006-12-21 20:01:43.000000000 -0500
@@ -1,55 +1,45 @@
 .\"
 .\"  Copyright (C) 2004 Red Hat, Inc.  All rights reserved.
-
-.\" groff -t -e -mandoc -Tlatin1 cman.5 | less
-
-.tl 'cman(5)' 'cman(5)'
-
-\fBNAME\fP
-.in +7
-cman - cluster.conf cman configuration section
-.sp
-.in -7
-
-
-\fBDESCRIPTION\fP
-.in +7
+.\"
+.TH cman 5
+.SH NAME
+cman \- cluster.conf cman configuration section
+.SH DESCRIPTION
 Cman configuration values are placed in the <cman> </cman> section of
 \fBcluster.conf\fP.  Per-node configuration related to cman is placed
 in the standard <clusternode> </clusternode> sections.  All cman
 configuration settings are optional; usually none are used.
-.in -7
 
-
-\fIUDP port\fR
-.in +7
+.SS IUDP port
 By default, cman will use UDP port 6809 for internode communication.  This can
 be changed by setting a port number as follows:
 
+.RS
+.nf
   <cman port="6809">
   </cman>
-.in -7
-
+.fi
+.RE
 
-\fIExpected votes\fR
-.in +7
+.SS Expected votes
 The expected votes value is used by cman to determine quorum.  The cluster is
 quorate if the sum of votes of existing members is over half of the expected
 votes value.  By default, cman_tool sets the expected votes value to be the sum
 of votes of all nodes listed in cluster.conf.  This can be overriden by setting
 an explicit expected_votes value as follows:
 
+.RS
+.nf
   <cman expected_votes="3">
   </cman>
+.fi
+.RE
 
 If the cluster becomes partitioned, improper use of this option can result
 in more than one partition gaining quorum.  In that event, nodes in each
 partition will enable cluster services.
-.in -7
 
-
-\fITwo node clusters\fR
-.in +7
+.SS Two node clusters
 Ordinarily, the loss of quorum after one out of two nodes fails will prevent
 the remaining node from continuing (if both nodes have one vote.)  Special
 configuration options can be set to allow the one remaining node to continue
@@ -57,42 +47,46 @@
 can be defined in cluster.conf.  The two_node and expected_votes values must
 then be set to 1 in the cman section as follows.
 
+.RS
+.nf
   <cman two_node="1" expected_votes="1">
   </cman>
-.in -7
-
+.fi
+.RE
 
-\fINode votes\fR
-.in +7
+.SS Node votes
 By default, a node is given one vote toward the calculation of quorum.
 This can be changed by giving a node a specific number of votes as
 follows:
 
+.RS
+.nf
   <clusternode name="nd1" votes="2">
   </clusternode>
-.in -7
-
-
-\fINode ID\fR
-.in +7
+.fi
+.RE
 
+.SS Node ID
 By default, a node is assigned a nodeid by the cluster manager (cman) when
 it joins the cluster.  This can be overriden by specifying a nodeid here.
 Using this option will ensure that a given node always has the same ID.
 A node's application to join the cluster may be rejected if you try to set
 the nodeid to one that is already used.
 
+.RS
+.nf
   <clusternode name="nd1" nodeid="1">
   </clusternode>
-.in -7
+.fi
+.RE
 
-
-\fIMulticast network configuration\fR
-.in +7
+.SS Multicast network configuration
 Cman can be configured to use multicast instead of broadcast (broadcast is used
 by default if no multicast parameters are given.)  To configure multicast add
 one line under the <cman> section and another under the <clusternode> section:
 
+.RS
+.nf
   <cman>
       <multicast addr="224.0.0.1"/>
   </cman>
@@ -100,15 +94,13 @@
   <clusternode name="nd1">
       <multicast addr="224.0.0.1" interface="eth0"/>
   </clusternode>
+.fi
+.RE
 
 The multicast addresses must match and the address must be usable on the
 interface name given for the node.
-.in -7
-
-
-.sp
-.in -7
-\fBSEE ALSO\fP
-.in +7
-cluster.conf(5), ccs(7), cman_tool(8)
+.SH SEE ALSO
+.BR cluster.conf (5),
+.BR ccs (7), 
+.BR cman_tool (8)